Soy Wax Candle Tips
1. Know when to extinguish
This is designed so that the candle’s wick doesn’t burn too high. Stop burning your candle when 1/2″ of wax remains. Our containers are 100% able to be re-purposed and recycled!
2. Trim your wicks
3. Dip your wicks
4. Avoid airflow
5. Troubleshooting Tips
Wax Chips Tips
1. Changing wax melts when the warmer is on
Alternative to cotton balls: A spatula. Turn off your wax melts warmer and wait a few minutes until the wax cools down. You still want it to be warm, just not completely liquid. Take your spatula, scoop out the wax, and throw it away.
2. Changing wax melts when the warmer is off
Alternative to cotton balls: A spatula. Turn off your wax melts warmer and wait a few minutes until the wax cools down. You still want it to be warm, just not completely liquid. Take your spatula, scoop out the wax, and throw it away.
3. Electric Warmer Liner
Aroma Oil Diffuser Care Tips
1. Frequency
- Preventing leftover oils from blending with the next oils;
- Preventing corrosion on any parts of the diffuser;
If you are unable to clean your diffuser after each use, at least make sure you are not letting water and aroma oils sit in the diffusers reservoir between uses! By doing this, you are actively preventing mold from forming.
2. Cleaning: Ultrasonic Plate
The ultrasonic plate or chip is what actually breaks down the aroma oils and disperse them with water into the air. Dip a cotton swab into alcohol and rub it over the plate/chip to remove any excess oil buildup.
Dish Soap Method:
1. Wet a microfiber or other soft cloth with water;
2. Add a small amount of natural dish soap to the wet cloth;
3. Wipe out the reservoir with the cloth;
4. Rinse out the cleaned reservoir with water;
5. Dry the reservoir with a clean cloth or cotton swabs;
Your diffuser is now clean and ready for use! If you are using the dish soap method to clean your diffuser, it is a good idea to separately clean the ultrasonic plate/chip.
3. Cleaning: Water + Vinegar Method
If you are using the water and vinegar method to clean your diffuser, you don’t need to additionally clean the ultrasonic plate/chip separately.
1. Fill the diffuser halfway with water, making sure to not fill up to the max line;
2. Add 10 drops of pure white vinegar;
3. Let the diffuser run for 3-5 minutes;
4. Drain the diffuser completely;
5. Dip a cotton swab in vinegar and to clean any corners of the diffuser;
6. Rinse with clean water;
7. Empty the diffuser and dry it with a cloth or clean cotton swabs;
Your diffuser is now clean and ready for use!
